Natural Pine Wooden Rug Hanger with Diamonds Metal Accent - Choose 18 to 48in Width

A Sunland Exclusive! Our original rug hangers are designed to safely and securely clamp the top edge of your rug. Simple design and finished natural pine allow the beauty of the rug to be the star while blending nicely with your decor. A rustic metal motif design adds a unique decorative touch. The top side has a Santa Fe lodge style design in the center. Metal tooth hanger(s) are securely mounted to back of unit for level hanging. To determine size needed, measure the top edge of your rug and select a length from 2-6-inches longer (leave more extra length for larger sized rugs). Our two-piece pine wood rails are handmade from natural wood finished for a neutral appearance. Each is hand made to order to the size specifications chosen in Tucson, Arizona, USA. Please allow 7-10 business days for delivery. To hang your rug: 1) Loosen (but do not remove) the screws on the back of the rug hanger. 2) Place the edge of the rug between the two pieces of wood. 3) Tighten the screws until the rug hanger clamps tightly to the edge of the rug. 4) Hang the rug on the wall using the tooth hangers (included on the back of the hanger) and wall mounting screws (not included). Wall anchors rated for the combined weight of your rug will be necessary for hollow walls. The Dimensions are 3.5-inches high (measured at center) x your choice of width x 1-inch deep. The height on either side of the center design ranges from 2 to 2.5 inches (varies with rug hanger width). The maximum amount of the top rug edge to be clamped is 1.125 inches (throat depth or distance from lower edge of hanger to adjustment screws). The screws do not penetrate the carpet. They remain above the rug and squeeze the two pieces of the hanger together on the edge.