Turquoise Pine Wall-Mount Rug Hanger - Choose 18in to 94in Width
Made to Order in 5-10 business days
This is the original On-the-Wall Wooden Rug Hanger in Turquoise on Pine. Our Southwestern themed Lodge style rug rail gently and securely attaches to the edge of your carpet or tapestry to transform it into amazing wall art. Backside Includes saw tooth hooks for easy hanging. Made entirely in Arizona, USA.
How to choose the correct rug hanger size:
The rug hanger should be at least 1-inch longer on either side than the top-edge of the rug or tapestry. For larger sizes, the hanger should extend 1-2 inches longer than the rug on either side. So, choose a width that is 2-4 inches longer than the width of the rug you will be hanging.
If the width you desire is not shown in the drop-down menu:
- Choose the next higher width than you need.
- Type in the "Custom Width Request" field the width that you would like it reduced to.
For example: if you want a 34-inch rug hanger, select "36 inches" from the Size menu then type "34 inches" in the Custom Width Request field.
A Sunland Exclusive! Our original wooden rug hangers are designed to safely and securely clamp the top edge of your rug. Simple design and natural pine finished in turquoise wash allow the beauty of the rug to be the star while blending nicely with your decor. The top side has a Santa Fe lodge style design in the center. Metal tooth hanger(s) are securely mounted to back of unit for level hanging. To determine size needed, measure the top edge of your rug and select a length from 2-4-inches longer (1-inch on each side for small rugs and up to 2-inches on each side for large rugs). Our two-piece pine wood rails are handmade from natural wood finished for a neutral appearance. Each is hand made to order to the size specifications chosen in Tucson, Arizona, USA. Please allow 7-10 business days for delivery. To hang your rug: 1) Loosen (but do not remove) the screws on the back of the rug hanger. 2) Place the edge of the rug between the two pieces of wood. 3) Tighten the screws until the rug hanger clamps tightly to the edge of the rug. 4) Hang the rug on the wall using the tooth hangers (included on the back of the hanger) and wall mounting screws (not included). Wall anchors rated for the combined weight of your rug will be necessary for hollow walls. The Dimensions are 3.5-inches high (measured at center) x your choice of width x 1-inch deep. The height on either side of the center design ranges from 2 to 2.5 inches (varies with rug hanger width). The maximum amount of the top rug edge to be clamped is 1.125 inches (throat depth or distance from lower edge of hanger to adjustment screws). The screws do not penetrate the carpet. They remain above the rug and squeeze the two pieces of the hanger together on the edge.
|Name||Turquoise Pine Wall-Mount Rug Hanger - Choose 18in to 94in Width|
|Custom Stock Status||Made to Order in 5-10 business days|
Write Your Own Review
We found other products you might like!
Customers Who Bought This Item Also Bought